HP Hitachi Dynamic Link Manager Software - Manual (Page 311)

3. Creating an HDLM Environment
287
In the example, the name of the logical device file of the HDLM device that
corresponds to
/dev/sda
can be identified as
sddlmaa
.
2. Add the name of the logical device file of the HDLM device that was confirmed
in step 1 to the
/etc/fstab
file.
The following is an example of editing the
/etc/fstab
file:
• For FC-SAN environments
/dev/sddlmaa /mnt/sda ext2 defaults 0 0
• For IP-SAN environments
/dev/sddlmaa /mnt/sda ext2 _netdev 0 0
This example adds a line for
/dev/sddlmaa
(name of the logical device file of
the HDLM device). For IP-SAN environments, specify
_netdev
for the mount
option.
3. Restart the host or manually mount the HDLM device.
HDLM-managed devices are mounted by using the logical device file name of the
HDLM device.
3.22.2 Migrating from an Environment Where a SCSI Device Is
Already Set
To move an already set SCSI device to an HDLM device:
1.
Identify the name of the logical device file of the HDLM device to be mounted
automatically.
Execute the
dlnkmgr
command's
view
operation, and identify the applicable
name of the logical device file of the HDLM and SCSI devices. For details on the
view
operation, see 6.7 view (Displays Information). The following is an actual
example.