HP Hitachi Dynamic Link Manager Software - Manual (Page 477)

6. Command Reference
453
In the sub-parameters,
-hdev
or
-pathid
, you can filter the LU information to
be displayed. If you omit both parameters, the command displays the information
about all the LUs recognized by HDLM.
For details on the contents of each displayed item, see Table 6-17: LU
Information.
The sub-parameters are:
-hdev
host-device-name
Displays information only for the paths accessing the specified host device.
Specify the name of the logical device file (minus the partition number),
/
dev/sddlm
[aa-pap], for the HDLM device. For details on logical device
files for HDLM devices, see 2.6 Logical Device Files for HDLM Devices.
The host-device-name string is case-sensitive.
-pathid
AutoPATH_ID
Use this parameter to display only the information about the LU that is
connected to the path with that specified AutoPATH_ID.
-t
Omits the title for each information item.
Example:
The following example shows how to display LU information by using iLUs
as a sorting key, and selecting the items to be displayed. Execute the
following command to display
SLPR
,
PathName
,
ChaPort
,
CLPR
,
Type
,
IO-Count
,
IO-Errors
,
DNum
,
IEP
, and HCTL:
IO-Errors ie
DNum dnu
IEP iep
HCTL hctl
All items are displayed
all
Items displayed by the dlnkmgr view -lu -item
command
Values specified after the -item parameter