HP Hitachi Dynamic Link Manager Software - Manual (Page 251)

3. Creating an HDLM Environment
227
„ An error message appears and the OS stops.
„ A prompt for a password for starting maintenance appears, and the OS stops.
The following explains the action to be taken for each case.
(1) When an Error Message Appears and the OS Stops
The probable causes of this error are as follows:
Cause 1
The initial RAM disk image file was specified incorrectly in the boot loader
configuration.
Cause 2
The initial RAM disk image file is corrupted.
Cause 3
The startup disk was no longer recognized first because the system environment
configuration was modified.
If the startup disk is not found due to the changes in the system environment
configuration, the following message appears:
To correct the above error:
1.
Restart the host.
2. In the window for setting information about boot loader startup, select the option
for startup from a SCSI device.
If startup from the SCSI device fails, enable only the path to the LU on which the
OS is installed, and then start the OS.
3. Check the definitions in the
/etc/lilo.conf
file,
/etc/grub.conf
file,
/