HP Hitachi Dynamic Link Manager Software - Manual (Page 584)

8. Messages
560
8.5 KAPL05001 to KAPL06000
KAPL05003-I
The HDLM driver (filter component) was successfully attached to
Disk (
aa...aa
), Partition (
bb...bb
).
Details
The path corresponding to disk aa...aa and partition bb...bb was successfully
registered in the core logic.
aa...aa: Disk sequence number (decimal number)
bb...bb: Fixed at 0 (decimal number)
Action
None.
KAPL05008-E
Could not allocate memory. (
aa...aa
:
bb...bb
) Execute the DLMgetras
utility to collect error information, and then contact your
vendor or maintenance company. Refer to the HDLM User's Guide
for instructions how to execute the DLMgetras utility.
Details
aa...aa: File ID, line number, (hexadecimal number)
bb...bb: Memory capture size (hexadecimal number)
Action
Execute the utility for setting HDLM driver option (
dlmsetopt
) and increase the
number of retries for allocating memory. For details on the
dlmsetopt
utility, see
7.6 dlmsetopt Utility for Setting HDLM Driver Options. Increase system
memory. Stop any unnecessary processes. If the problem is not solved, execute
the
DLMgetras
utility for collecting HDLM error information, and then contact
your HDLM vendor or the maintenance company if there is a maintenance
contract for HDLM. For details on the
DLMgetras
utility, see 7.2 DLMgetras
Utility for Collecting HDLM Error Information.
KAPL05011-E
Could not attach the HDLM driver (filter component) to Disk
(
aa...aa
), Partition (
bb...bb
). (
cc...cc
:
dd...dd
) Execute the DLMgetras
utility to collect error information, and then contact your
vendor or maintenance company. Refer to the HDLM User's Guide
for instructions how to execute the DLMgetras utility.
Details