HP Hitachi Dynamic Link Manager Software - Manual (Page 452)

6. Command Reference
428
for load balancing.
You can specify a decimal (base 10) value from
0
to
999999
. The default is
32
.
If you specify
0
, operation is the same as when load balancing is disabled.
-s
Executes the command without displaying the message asking for confirmation
of command execution from the user. Specify this parameter if you want to skip
the response to the confirmation message: for example, when you want to execute
the command in a shell script or batch file.
(2) To Display the Format of the Set Operation
-help
Displays the format of the
set
operation.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr set -help
set:
Format
dlnkmgr set { -lb on [ -lbtype { rr | exrr | lio | exlio | lbk | exlbk } ]
| -lb off
| -ellv ElogLevel
| -elfs ElogFileSize
| -elfn Number-Of-ElogFiles
| -systflv TraceLevel
| -systfs TraceFileSize
| -systfn Number-Of-TraceFiles
| -pchk on [ -intvl Interval-Time ]
| -pchk off
| -afb on [ -intvl Interval-Time ]
| -afb off
| -iem on