HP Hitachi Dynamic Link Manager Software - Manual (Page 448)

6. Command Reference
424
Legend:
AFB: Automatic failback
IEM: Intermittent error monitoring
#1
When this condition is not satisfied, the KAPL01080-W message is output and an
error occurs. The status of intermittent error monitoring does not change.
#2
Because automatic failback is
off
, intermittent error monitoring is disabled.
Example
The following example shows how to monitor for intermittent errors.
# /opt/DynamicLinkManager/bin/dlnkmgr set -iem on -intvl
20 -iemnum 2
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01001-I The HDLM command completed normally.
Operation name = set, completion time = yyyy/mm/dd
hh:mm:ss
#
Set IEM to
off
. • IEM is disabled.
• The error count, elapsed monitoring time, and
information about paths not subject to automatic
failbacks are cleared.
off
Set AFB to
on
. The operations of AFB and IEM do not change.
Change the AFB setting. AFB operates using new settings.
Set AFB to
off
. AFB is disabled.
Set IEM to
on
.
IEM is enabled.
#1
off
on
#2 Set AFB to
on
.
AFB and IEM are enabled. #1
Set AFB to
off
. The operations of AFB and IEM do not change.
off
Set AFB to
on
. AFB is enabled.
Set AFB to
off
. The operations of AFB and IEM do not change.
Setting Available operation Result of operation
AFB IEM