HP Hitachi Dynamic Link Manager Software - Manual (Page 369)

4. HDLM Operation
345
The following is an example of executing the
dlnkmgr
command's
view
operation:
# /opt/DynamicLinkManager/bin/dlnkmgr view -drv
PathID HDevName Device LDEV
000000 sddlmaa /dev/sdag 9970/9980.15001.05B7
000001 sddlmaa /dev/sdq 9970/9980.15001.05B7
000002 sddlmab /dev/sdr 9970/9980.15001.05B0
000003 sddlmac /dev/sds 9970/9980.15001.05B1
000004 sddlmad /dev/sdt 9970/9980.15001.05B2
000005 sddlmae /dev/sdu 9970/9980.15001.05B3
000006 sddlmaf /dev/sdv 9970/9980.15001.05B4
000007 sddlmag /dev/sdw 9970/9980.15001.05B5
:
000028 sddlmae /dev/sdm 9970/9980.15001.05B3
000029 sddlmaf /dev/sdn 9970/9980.15001.05B4
000030 sddlmag /dev/sdo 9970/9980.15001.05B5
000031 sddlmah /dev/sdp 9970/9980.15001.05B6
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
For details on the displayed items and their descriptions, see 6.7 view (Displays
Information).
4.3.6 Initializing Statistical Information for Paths
This section explains how to initialize statistical information (I/O counts and I/O
errors) for all the paths managed by HDLM.
This procedure is useful when you want to check the number of I/O operations and I/
O errors that have occurred since the last time the I/O counts and I/O errors were
initialized to
0
.
To initialize statistical information for paths:
1.
Check the current status of the path.
The following is an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path
2. To initialize statistical information for all the paths managed by HDLM, execute
the
dlnkmgr
command's
clear
operation with the
-pdst
parameter specified.
The following is an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr clear -pdst
KAPL01049-I Would you like to execute the operation?