beautypg.com

HP Hitachi Dynamic Link Manager Software User Manual

Page 390

background image

4. HDLM Operation

366

Figure 4-3: When the Status of the Path That Goes Through the Fiber Cable to

Be Replaced Is Offline(C)

2.

Replace the fiber cable for the path that has been placed in Offline(C) status.
In this example, replace the fiber cable connected to the HBA with host port

number

0001

.

3.

Place in Online status the path that goes through the replaced fiber cable (that is,

the path that goes through the HBA connected to the fiber cable).
For example, to place in Online status the path that goes through the HBA with

host port number

0001

and bus number

0000

, execute the following command:


# /opt/DynamicLinkManager/bin/dlnkmgr online -hba 0001.0000

4.

Check the path information.
For example, execute the following command:

This manual is related to the following products:
See also other documents in the category HP Storage: