HP Hitachi Dynamic Link Manager Software - Manual (Page 592)

8. Messages
568
aa...aa: IOCTL code (hexadecimal number)
Action
None.
KAPL06010-E
Could not process the IOCTL(
aa...aa
). (
bb...bb
:
cc...cc
)
Details
An IOCTL request was not processed normally.
aa...aa: IOCTL code (hexadecimal number)
bb...bb: Error number (hexadecimal number)
cc...cc: 0 (fixed)
Action
Check the message of the HDLM command (
dlnkmgr
) or HDLM manager, and
then take the appropriate action. If you do not know the appropriate action,
execute the
DLMgetras
utility for collecting HDLM error information, and then
contact your HDLM vendor or the maintenance company if there is a maintenance
contract for HDLM and report the error and detail code. For details on the
DLMgetras
utility, see 7.2 DLMgetras Utility for Collecting HDLM Error
Information.
KAPL06013-E
Could not write log information into the log buffer.
(
aa...aa
:
bb...bb
)
Details
Log information from the filter driver was destroyed without being written to a
log buffer because the attempt to reserve memory for the log information failed.
aa...aa: Message code (hexadecimal number)
bb...bb: Buffer size (hexadecimal number)
Action
Check whether any other error occurred. The information that could not be
written is discarded.
Review the actual memory size when another error does not occur.
When the actual memory size is insufficient, increase the actual memory size.
When the actual memory size is sufficient, execute the
DLMgetras
utility for
collecting HDLM error information, and then contact your HDLM vendor or the
maintenance company if there is a maintenance contract for HDLM. For details
on the
DLMgetras
utility, see 7.2 DLMgetras Utility for Collecting HDLM Error