HP Hitachi Dynamic Link Manager Software - Manual (Page 164)

3. Creating an HDLM Environment
140
First, check the current settings. Execute the following command:
# mount
The current settings will be output as shown in Figure 3-2: Execution Results of
the mount Command.
Figure 3-2: Execution Results of the mount Command
The shaded portion shows the SCSI device to be managed by HDLM. Execute the
following command on this SCSI device to unmount it:
# umount /mntpt
5. If the disks are set to be mounted automatically when the host starts, delete this
setting from the
/etc/fstab
file.
An example of how to edit the
/etc/fstab
file is shown in
Figure 3-3: Example of How to Edit the /etc/fstab File.
Figure 3-3: Example of How to Edit the /etc/fstab File
Comment out the shaded portions by placing a hash mark (
#
) at the beginning of
each line. The Linux functionality that adds
LABEL=
to a SCSI device is not
supported in HDLM. Do not use this functionality.