HP Hitachi Dynamic Link Manager Software - Manual (Page 659)

8. Messages
635
For details on the
DLMgetras
utility, see 7.2 DLMgetras Utility for Collecting
HDLM Error Information.
KAPL10935-W
An internal error occurred in the file operation. File name = /
etc/opt/DynamicLinkManager/hdlm_utillog.conf. Execute the
DLMgetras utility to collect error information, and then contact
your vendor or maintenance company.
Details
An internal error occurred during operations of the settings file for the HDLM
utility log (
/etc/opt/DynamicLinkManager/hdlm_utillog.conf
). A
maximum log file size of 1024 KB will be assumed, and the processing of the
dlmcfgmgr
utility will continue.
Action
Execute the
DLMgetras
utility for collecting HDLM error information, and then
contact your HDLM vendor or the maintenance company if there is a maintenance
contract for HDLM.
For details on the
DLMgetras
utility, see 7.2 DLMgetras Utility for Collecting
HDLM Error Information.
KAPL10936-W
The file format is invalid. File name = /etc/opt/
DynamicLinkManager/hdlm_utillog.conf. Refer to the Messages
section of the HDLM User's Guide for instructions to correct this
problem.
Details
The format of the settings file for the HDLM utility log (
/etc/opt/
DynamicLinkManager/hdlm_utillog.conf
) is invalid.A maximum log file
size of 1024 KB will be assumed, and the processing of the
dlmcfgmgr
utility
will continue.
Action
Execute the
dlmcfgmgr
utility with the
-logfs
parameter specified. If the error
occurs again,
/etc/opt/DynamicLinkManager/hdlm_utillog.conf
which is not a regular file might exist. Delete
/etc/opt/
DynamicLinkManager/hdlm_utillog.conf
and then execute the
dlmcfgmgr
utility again. For details on the
dlmcfgmgr
utility, see
7.3 dlmcfgmgr Utility for Managing the HDLM Configuration.
KAPL10937-W
The maximum number of paths was exceeded. Revise the
configuration so that the number of paths is less than, or the