HP Hitachi Dynamic Link Manager Software - Manual (Page 436)

6. Command Reference
412
the response to the confirmation message: for example, when you want to execute
the command in a shell script or batch file.
Example
The following example shows how to place a path, whose AutoPATH_ID is
000002
, online without asking for confirmation of command execution
from the user:
# /opt/DynamicLinkManager/bin/dlnkmgr online -pathid 2
-s
KAPL01061-I 1 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
(2) To Display the Format of the Online Operation
-help
Displays the format of the
online
operation.
Example
The following example shows how to display the format of the
online
operation:
# /opt/DynamicLinkManager/bin/dlnkmgr online -help
online:
Format
dlnkmgr online [-path] [-s]
dlnkmgr online [-path] -hba HBAPortNumber.BusNumber
[-s]
dlnkmgr online [-path] -cha -pathid AutoPATH_ID [-s]
dlnkmgr online [-path] [-pathid AutoPATH_ID] [-s]
dlnkmgr online [-path] [-device SCSI_Device_Name]
[-s]
Valid value
AutoPATH_ID { 000000 - 999999 }(Decimal)
KAPL01001-I The HDLM command completed normally.
Operation name = online, completion time = yyyy/mm/dd
hh:mm:ss
#
Reference
Using the
view
operation together with standard UNIX commands enables you to
filter the path information listed for a specific HBA port or CHA port. For details about
the
view
operation, see 6.7 view (Displays Information).
We recommend that you use the following command and verify the information on the