HP Hitachi Dynamic Link Manager Software - Manual (Page 675)

8. Messages
651
KAPL12327-E
An invalid entry is registered in the file. File name =
aa...aa
Details
aa...aa: The name of the file containing the invalid entry
Action
Take the following actions depending on the file name output, and then re-execute
the
dlmmkinitrd
utility.
In the case of
/etc/lvm/lvm.conf
file
Edit the following lines as described in 3.7.5 Settings for Using a Logical
Volume (LVM2) on an HDLM Device as a Boot Disk or 3.7.6 Upgrade
Installation in an Environment Where a Logical Volume (LVM2) on an
HDLM Device Is Used as a Boot Disk:
• filter
• types
• md_component_detection
In the case of
/etc/opt/DynamicLinkManager/dlmmkinitrd.conf
file
Install an HBA driver, which is supported as a boot disk by HDLM.
Or use an HBA, which is supported as a boot disk by HDLM.
In the case of
/etc/sysconfig/kernel
file
The OS environment is incorrect. Add the names of the HBA drivers that
have to be included in the initial RAM disk image into the
INITRD_MODULES=
line of the
/etc/sysconfig/kernel
file.
KAPL12328-I
Execution of linuxrc completed.
Action
None.
KAPL12329-I
The utility for supporting the boot disk started.
Action
None.
KAPL12330-I
The utility for supporting the boot disk completed.
Action