HP Hitachi Dynamic Link Manager Software - Manual (Page 531)

7. Utility Reference
507
command executed from another application.
InquiryTimeout
Specify a numeric value of -1 or in the range from 1 to 3,600.
-1: This sets the timeout value to 30 seconds, which is HDLM's default value.
1 to 3,600: Timeout value (in seconds)
If the following values are specified, the message KAPL12553-W is
displayed and then the processing ends:
• 0
• Value of -1 or less
• Value more than 3,600
• Non-numeric value.
-inqr
Specify the number of retries of the
SCSI INQUIRY
command. In HDLM, the
default number of retries is 1. Note that the number of retries specified by using
the
-inqr
parameter only applies to the
SCSI INQUIRY
command executed from
HDLM. This value has no effect on the
SCSI INQUIRY
command executed from
another application.
InquiryRetry
Specify a numeric value in the range from -1 to 2,147,483,646.
-1: This sets the number of retries to 1, which is HDLM's default value.
0: The system does not retry.
1 to 2,147,483,646: The system retries the specified number of times.
If the following values are specified, the KAPL12553-W message is
displayed and then processing ends:
• Value of -1 or less
• Value more than 2,147,483,646
• Non-numeric value
-h
Displays the format of the
dlmsetopt
utility for setting the HDLM driver option.
Example
Example 1:
In this example, the utility sets the retry count to 100000: