HP Hitachi Dynamic Link Manager Software - Manual (Page 373)

4. HDLM Operation
349
# /opt/DynamicLinkManager/bin/dlnkmgr set -lic
KAPL01049-I Would you like to execute the operation? Operation
name = set [y/n]: y
KAPL01071-I A permanent license was installed.
#
4.3.10 Viewing HDLM Version Information
This section explains how to display HDLM version information.
To display HDLM version information, execute the
dlnkmgr
command's
view
operation with the
-sys
parameter specified. The following is an example of
executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys
HDLM Version :
x.x.x-xx
Service Pack Version :
Load Balance : on(extended lio)
Support Cluster :
Elog Level : 3
Elog File Size (KB) : 1000
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Reservation Status :
Intermittent Error Monitor : off
HDLM Manager Ver WakeupTime
Alive
x.x.x-xx
yyyy/mm/dd hh:mm:ss
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive
x.x.x-xx
yyyy/mm/dd hh:mm:ss 1000
HDLM Driver Ver WakeupTime
Alive
x.x.x-xx
yyyy/mm/dd hh:mm:ss
LicenseType Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
The value displayed in
HDLM version
indicates the HDLM version.