HP Hitachi Dynamic Link Manager Software - Manual (Page 462)

6. Command Reference
438
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive
x.x.x-xx
yyyy/mm/dd hh:mm:ss 1000
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
Example 4
The following example shows how to display information about the HDLM
driver:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -pdrv
HDLM Driver Ver WakeupTime
Alive
x.x.x-xx
yyyy/mm/dd hh:mm:ss
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
Example 5
The following example shows how to display information about the HDLM
license:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -lic
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
Example 6
The following example shows how to display information about the audit log
settings:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -audlog
Audit Log : off
Audit Log Category : -
Audit Log Facility : -
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
Example 7
The following example shows how to display the number of times the same path
can be used for load balancing:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys