HP Hitachi Dynamic Link Manager Software - Manual (Page 651)

8. Messages
627
(decimal number)
Action
Revise the configuration of the HDLM device to reduce the number of HDLM
devices used, and then re-execute the
dlmcfgmgr
utility. For details on the
dlmcfgmgr
utility, see 7.3 dlmcfgmgr Utility for Managing the HDLM
Configuration.
KAPL10358-E
The device name is too long. Maximum length =
aa...aa
. Check that
the logical device file name of the HDLM device is correct, and
then execute the dlmcfgmgr utility again.
Details
An attempt to execute the HDLM-configuration definition utility (
dlmcfgmgr
)
failed because the name of the logical device file is too long.
aa...aa: Maximum length of characters for a logical device file name (decimal)
Action
Check that the logical device file name of the HDLM device is correct, and then
re-execute the
dlmcfgmgr
utility. For details on the
dlmcfgmgr
utility, see
7.3 dlmcfgmgr Utility for Managing the HDLM Configuration.
KAPL10359-E
Multiple instances of the HDLM-configuration definition utility
cannot be executed concurrently. Wait until the running
dlmcfgmgr utility ends, and then try the dlmcfgmgr utility
again.
Details
An attempt to execute
dlmcfgmgr
failed because two or more instances of
dlmcfgmgr
were executed simultaneously.
Action
Wait until the running HDLM-configuration definition utility (
dlmcfgmgr
) ends,
and then re-execute the HDLM-configuration definition utility (
dlmcfgmgr
). For
details on the
dlmcfgmgr
utility, see 7.3 dlmcfgmgr Utility for Managing the
HDLM Configuration.
KAPL10360-I
HDLM has activated a path for an HDLM device. HDLM device =
aa...aa
,
Device =
bb...bb
(Host:
cc...cc
Channel: 0 ID:
dd...dd
Lun:
ee...ee
)
Details
By executing the HDLM-configuration definition utility (
dlmcfgmgr
), the path
to the HDLM device has been made active.