HP Hitachi Dynamic Link Manager Software - Manual (Page 468)

6. Command Reference
444
When you use the
-c
parameter, the number of characters that can be displayed
in the product ID element of the
DskName
field is limited to 10. When there are
11 or more characters in the product ID, the 8th and following characters are
abbreviated to ellipses (
...
).
The sub-parameters (following
-path -c
) are:
-stname
Use this parameter to display the model ID of the storage system in the
product ID element of the
DskName
field. When this parameter is omitted,
the command displays the product ID or emulation type of the storage system
instead.
For details about the information about product IDs, see
Table 6-14: Product ID displayed by the view -path operation.
-srt {lu|cp}
Use this parameter to sort the path information in ascending order, according
to the specified sorting key.
The sorting keys are as follows: the first sorting key is the name of the
storage system (
DskName
), the second sorting key is the value specified by
the
-srt
parameter, and the third sorting key is AutoPATH_ID.
The available parameter values to specify the second sorting key are:
•
lu
: LU number of the storage system
•
cp
: Port number of the CHA
When the
-srt
parameter is omitted, the path information is listed in
ascending order of AutoPATH_IDs.
-t
Omits the title for each information item.
Example
The following example shows how to abbreviate the display of information
about the paths, ordered by iLU.