beautypg.com

Seed Hawk Raven 2012 User Manual

Page 88

background image

Chapter 5

76

Seed Hawk® Viper Pro™ Installation & Operation Manual

2.

Touch Next. The Product Chain Setup screen displays. Select which products to chain together and enter
the sequence in which the products will be used.

3.

Touch Next. Select the Enable Auto Advance option to allow the Viper Pro to automatically advance to the
next product in the chain. If the auto advance feature is disabled, the Viper Pro will display a prompt to allow
the operator to manually advance to the next tank or bin.

Note:

Products monitored by air cart bin level sensors will advance when the bin level sensor detects 5%
bin height remaining. Be sure that the bin level sensor is properly connected and calibrated for all
products set to advance on a bin level sensor alarm.

4.

Select the advance setting which will trigger the Viper Pro to warn the operator or automatically advance to
the next channel. Select only one advance setting to avoid setup errors.

Note:

If Advance or Warn on Bin Level Sensor Alarm is selected, all products in the chain must have
a bin level sensor enabled.

5.

Press Next. The final Product Chain Setup screen displays. Set the product name and options for chained
tanks or bins before any non-chained products.

Refer to the Product Setup section on page 77 for details on setting product information for products not
controlled in a product chain.

This manual is related to the following products: