Seed Hawk Raven 2012 - Manual (Page 101)

5
Manual No. 016-3001-003 89
Using the Seed Hawk® Viper Pro System
Group of Points. Select this option to allow the operator to quickly plot multiple points of the same type during
an active job.
For example, select the ‘Group of Points’ option and a custom entry for “Rocks.” During the job application, the
operator can access the Scout tab and touch the “Rocks Point” button displayed in the map area to plot a point
at the current vehicle location. The Viper Pro scout map may then be used to help re-locate the rocks at a later
date for removal.
Line. The line option may be used to plot a path through a field such as drainage tile or a wash out.
Zone. A zone creates a closed path or shape on the scout map. Specific zones may be used by the optional
SCT system to automatically control sections based upon a completed SCT apply or no-apply zone map and
field boundary. See Chapter 9, Sectional Control Technology™ (SCT), for more information about using the
SCT feature with the Viper Pro field computer.
How to Mark a Field Boundary
Note:
Other zones, lines or points may be recorded using a similar process as the one explained below.
Within an active job:
1. Select the Scout tab.
2. Touch the Record button, then Zone.
3. Select Field Boundary from the available features.
4. Select the preferred method for recording or plotting points along the boundary path.
Manual Point Entry. The operator enters feature or boundary points manually. The Viper Pro will
automatically connect each point with a straight line to create a field or zone boundary.