Seed Hawk Raven 2012 - Manual (Page 244)

Appendix C
232 Seed Hawk® Viper Pro™ Installation & Operation Manual
4. Press the Calibration Assistance button on the Miscellaneous Settings screen. The Speed Calibration
screen will appear.
5. Mark off the physical distance to be driven for the test.
6. Enter a measured test distance, in feet [meters], in the Test Distance box.
Note:
A distance of at least 500 feet [152 meters] should be used for this test. A shorter distance may
give less accurate results.
7. Press Next.
8. Begin driving the machine toward the test distance starting point at normal speed. When the beginning of
the test distance is reached, touch the Begin Cal Run button. **Calibrating** will begin flashing on-screen.
9. Drive the test distance.