Seed Hawk Raven 2012 - Manual (Page 73)

CHAPTER
5
Manual No. 016-3001-003 61
Chapter 5
Using the Seed
Hawk
®
Viper Pro
System
Seed Hawk Switch Box
The Seed Hawk switch box may be used to manually control products and/or sections or to enable automatic
product rate control or the Seed Hawk SCT system.
Section Switches
In an SCT system, the section switches set the control mode for drill sections. Toggle section switches to the
OFF or ON position to manually control sections of the drill. Toggle the switch to the SCT position to allow the
Seed Hawk Viper Pro and SCT system to automatically control assigned functions based on coverage or
apply/no-apply maps.
Master
Toggle the master switch to control product application and drill sections. The master switch must be in the ON
position to allow product application. Toggle the master switch to the OVERRIDE position to momentarily
override the SCT system and turn sections on.
Packing Pressure
Use the packing pressure switch to increase or decrease the pressure on the packer gauge wheels.
Section
Switches
Product
Switches