Seed Hawk Raven 2012 - Manual (Page 214)

Chapter 12
202 Seed Hawk® Viper Pro™ Installation & Operation Manual
To access the File Maintenance feature:
1. Touch Menu on the Viper Pro main screen.
2. Select File Maint. The following file maintenance options will be displayed.
Wireless File Transfer
The Wireless File Transfer button is displayed only if a Slingshot Field Hub is connected and communicating
with the Viper Pro field computer. Select this option to setup the desired method for initiating file transfer via a
wireless connection.
Note:
A wireless signal is required to transfer files from the Viper Pro field computer. If signal is weak or
not available, files may not be transferred as expected.
Files may also be transferred to a USB flash drive and then uploaded to the Slingshot website from
a home or office PC. Refer to the Uploading Job Reports from a USB to the Slingshot Website
section on page 211 for more information.
Automatic
If the “Automatic File Upload at End of Job” option is selected, the Viper Pro will attempt to transfer application
files automatically each time a job file is closed.
Prompt
If the “Prompt Before Upload at End of Job” option is enabled, the operator will be prompted to before the Viper
Pro attempts to transfer files.
Disable
Select the “Disable Wireless File Transfer” to disable sending files from the Viper Pro.