Seed Hawk Raven 2012 - Manual (Page 271)

Manual No. 016-3001-003 259
To view weather information, press the Display Data button on the lower right hand side of the Viper, and then
touch in the data area to toggle to the weather information.
Note:
If the Wind Direction heading displayed in the Weather Information does not appear as expected,
re-initialize the Weather Station as described in the Comm Port Configuration section on
page 258.
Press the Record button to log the current weather conditions into the application report. The record button will
only display when in a job. The record button may be pressed as many times as desired during the job, but
only the information from the last button press before the job is closed will be recorded into the application
report.