Seed Hawk Raven 2012 - Manual (Page 84)

Chapter 5
72 Seed Hawk® Viper Pro™ Installation & Operation Manual
Machine Control Settings
1. Touch the Next button on the Assign Recommendations to Channel screen to proceed with the job set up
process and display the Machine Control Settings screen.
2. The Viper Pro will automatically enter the current date and time as a default job name.
To simplify working with job files, or if job files will be accessed at a later date to finish product application, it
is recommended to rename the job. Use the on-screen keyboard to enter a job name.
3. Select the guidance pattern best suited to the field area and application. Refer to the Swath Guidance
Patterns section on page 104 for details on the available patterns and using guidance during a job.
4. Select one of the following Section Control mapping modes for the job:
• Standard Section Control - This method requires no action or additional setup by the operator.
The operator simply begins to apply product to the field and the Viper Pro monitors the coverage
map and will turn sections off if the implement enters into a previously applied area.
• Create Section Control No-Apply Map - This method allows the operator to define apply/no-
apply zones within the field. This method is typically used if no previous map has been created
and the operator wants to define the field boundaries and other boundaries such as waterways,
well heads, etc.
• Load Section Control No-Apply Map - This method allows the operator to load a previously
created zone map. Select the desired map from the list of available Section Control maps
currently stored on the Viper Pro.
• Map From Field Boundary - This method allows the Viper Pro to generate a no-apply boundary
map from the current field boundary.
Note:
See Chapter 9, Sectional Control Technology™ (SCT), for details on setting up the Section Control
feature.