Seed Hawk Raven 2012 - Manual (Page 156)

Chapter 8
144 Seed Hawk® Viper Pro™ Installation & Operation Manual
Adjust Brightness
Touch the Adjust Brightness button at the bottom of the About Viper prompt to display the Adjust Brightness
settings.
The Adjust Brightness settings prompt displays the following:
Day/Night Mode Selection Button. The mode selection button also displays the current mode enabled.
Touch this button until the desired mode is displayed.
Increase/Decrease Arrows. Touch the arrows pointing up and down to either increase or decrease the
display brightness. Touch and hold for five seconds to change the brightness value in increments of 5.
Brightness Value. The current display brightness setting is displayed in the center of the window. In Day
mode, this value may be set between 50 and 100. In Night mode, the brightness value may be set between 0
and 100.
OK. Touch the OK button to accept the current mode and brightness value and return to the Viper Pro main
screen.
Note:
The Viper Pro will always default back to the day mode when powered up or restarted.
Mode Selection Button -
Day Mode Enabled Mode Selection Button -
Night Mode Enabled