Seed Hawk Raven 2012 - Manual (Page 82)

Chapter 5
70 Seed Hawk® Viper Pro™ Installation & Operation Manual
8. When all settings for the chain profile are set, touch the OK button displayed in the lower, right corner of the
screen to accept the profile settings and return to the Assign Recommendations to Channel screen.
Note:
If a product chain profile has been selected, the chained product channels will be highlighted on
the Assign Recommendations to Channel screen.
Select a recommendation for the chain as described below to complete the chain setup process.
Assign Recommendations to Product Channels
Channel Indicators
The channel indicators display the currently selected channel and which channels are enabled or disabled
for the job. The channel indicators will display as follows:
• Green - Currently selected channel. Touching any channel indicator once selects the channel
and enables the channel for the job. Touch the green channel indicator again to disable the
selected channel for the job.
• Dark - Channel is enabled.
• Light - Channel is disabled.
1. Touch the channel to which a recommendation will be applied.
2. Touch the recommendation for the product to be applied using the selected control channel. A red box will
display around the selected recommendation and the preview information will be displayed.
3. Select other channels and assign recommendations as the job requires.
Note:
A recommendation assigned to a different product channel will display a green check mark to the
right of the recommendation name. The red box and preview information will only display if the
recommendation is assigned to the selected channel.
A recommendation must be assigned for each enabled channel before proceeding with the job setup. A
single recommendation can be assigned to multiple channels if more than one channel will apply the same
product.