Seed Hawk Raven 2012 - Manual (Page 279)

Manual No. 016-3001-003 267
2. Touch the “Registration Code” button to get a four digit registration code from the Slingshot™ site.
3. With the registration code, login to the Slingshot™ site.
http://slingshot.raveniat.net
4. Select the “Register a Device” button.
5. Enter the required device information and the four digit registration code from the Viper Pro.
Note:
Be sure to enable the Remote Service and Web Access features if desired (recommended). These
features may be enabled later by accessing the Slingshot™ site.
6. Select the “Register” button.
To test wireless access:
1. Test the Wireless File Transfer feature by either one of the following:
• Wait for the Viper Pro to automatically search for available files for transfer. This process may
take up to five minutes.
• Touch the File Manager tab on the Wireless Status screen and select the “Send/Receive Files”
button at the top of the display.
2. If the Remote Service feature was enabled during registration, select the Remote Service tab and touch the
“Enable Remote Service” button.
3. If a remote service session is enabled successfully, touch the button now labeled “Disable Remote Service.”
4. Exit the Wireless Status screen by pressing the “OK” button in the lower, right corner of the screen.
5. If the Web Access feature was enabled during registration, touch Menu>Web to open the Viper Pro internet
browser and test the web access feature.