Seed Hawk Raven 2012 - Manual (Page 72)

Chapter 4
60 Seed Hawk® Viper Pro™ Installation & Operation Manual
• Touch the Tally Registers button to view or reset application volume and area tallies for each node or
channel or the Viper Pro odometer.
Note:
The tally registers information may also be displayed by selecting the ‘Display Data’ icon on the
main screen.
• A CAN Profile may be used to copy or back up the settings for nodes on the CANbus. Use a CAN profile to
quickly reset or restore settings for various seed types or products controlled with the Viper Pro field
computer.
• The Current Alarms button is displayed only when an alarm condition is detected by the Viper Pro during
an active job. Refer to the Alarms section on page 95 for detailed information on alarm conditions.