Seed Hawk Raven 2012 - Manual (Page 66)

Chapter 4
54 Seed Hawk® Viper Pro™ Installation & Operation Manual
Display Data
Touch the Display Data icon to access an overview of the tally register information for each product node or
control channel directly from the home screen.
Note:
Display Data is only accessible if the Viper Pro is set as the CAN controller.
The data displayed by pressing this button is also available by touching within the Product Control
area and selecting the Tally Registers button at the bottom of the CAN Controller Status screen.
The field volume, field area, tank volume, total volume, total area, and area per hour tallies are displayed within
the display prompt. Touch the display data prompt to cycle through the available data displays including
weather information if the optional hardware is installed. To hide the data prompt, touch the Display Data icon
again.
Note:
The display data prompt is for display purposes only and the tallied information cannot be modified
from this view. To modify the data displayed, refer to the Tally Registers section on page 92. See
Appendix G, Weather Station, for information on displaying weather data in this area using the
optional weather station.
Wireless Communication Status
The status of wireless communications is displayed on the Viper Pro main screen in the tool bar below the
map.
Note:
For more information on using the wireless communication features with the Viper Pro, see
Appendix H, Wireless Communications and Remote Service.
For instructions on installing and setting up the Slingshot Field Hub, refer to the Field Hub
Installation Guide provided with the wireless device.
Wireless
Communication
Status Icon