Watlow EZ-ZONE RMC - Manual (Page 92)

Watlow EZ-ZONE ® RMC Module • 89 • Chapter 4 Setup Page
RMC Module • Setup Page
Dis-
play
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Parameter
ID
Data
Type
& Read/
Write
[`iP;1]
[ ip.1] Linearization (1 to 4)
Input Point 1
Set the value that will
be mapped to output 1.
-1,999.000 to 9,999.000 0.0 4534
[offset 70]
0x86 (134)
1 to 4
8
157 34008 float
RWES
[`oP;1]
[ op.1] Linearization (1 to 4)
Output Point 1
Set the value that will
be mapped to input 1.
-1,999.000 to 9,999.000 0.0 4554
[offset 70]
0x86 (134)
1 to 4
0x12 (18)
158 34018 float
RWES
[`iP;2]
[ ip.2] Linearization (1 to 4)
Input Point 2
Set the value that will
be mapped to output 2.
-1,999.000 to 9,999.000 1.0 4536
[offset 70]
0x86 (134)
1 to 4
9
159 34009 float
RWES
[`oP;2]
[ op.2] Linearization (1 to 4)
Output Point 2
Set the value that will
be mapped to input 2.
-1,999.000 to 9,999.000 1.0 4556
[offset 70]
0x86 (134)
1 to 4
0x13 (19)
160 34019 float
RWES
[`iP;3]
[ ip.3] Linearization (1 to 4)
Input Point 3
Set the value that will
be mapped to output 3.
-1,999.000 to 9,999.000 2.0 4538
[offset 70]
0x86 (134)
1 to 4
0xA (10)
161 34010 float
RWES
[`oP;3]
[ op.3] Linearization (1 to 4)
Output Point 3
Set the value that will
be mapped to input 3.
-1,999.000 to 9,999.000 2.0 4558
[offset 70]
0x86 (134)
1 to 4
0x14 (20)
162 34020 float
RWES
[`iP;4]
[ ip.4] Linearization (1 to 4)
Input Point 4
Set the value that will
be mapped to output 4.
-1,999.000 to 9,999.000 3.0 4540
[offset 70]
0x86 (134)
1 to 4
0xB (11)
163 34011 float
RWES
[`oP;4]
[ op.4] Linearization (1 to 4)
Output Point 4
Set the value that will
be mapped to input 4.
-1,999.000 to 9,999.000 3.0 4560
[offset 70]
0x86 (134)
1 to 4
0x15 (21)
164 34021 float
RWES
[`iP;5]
[ ip.5] Linearization (1 to 4)
Input Point 5
Set the value that will
be mapped to output 5.
-1,999.000 to 9,999.000 4.0 4542
[offset 70]
0x86 (134)
1 to 4
0xC (12)
165 34012 float
RWES
[`oP;5]
[ op.5] Linearization (1 to 4)
Output Point 5
Set the value that will
be mapped to input 5.
-1,999.000 to 9,999.000 4.0 4562
[offset 70]
0x86 (134)
1 to 4
0x16 (22)
166 34022 float
RWES
[`iP;6]
[ ip.6] Linearization (1 to 4)
Input Point 6
Set the value that will
be mapped to output 6.
-1,999.000 to 9,999.000 5.0 4544
[offset 70]
0x86 (134)
1 to 4
0xD (13)
167 34013 float
RWES
[`oP;6]
[ op.6] Linearization (1 to 4)
Output Point 6
Set the value that will
be mapped to input 6.
-1,999.000 to 9,999.000 5.0 4564
[offset 70]
0x86 (134)
1 to 4
0x17 (23)
168 34023 float
RWES
Note:
Some values will be rounded off to fit in the four-character display .
Full values can be read with other interfaces .
Note:
If there is only one instance of a menu, no submenus will appear .
** These parameters/prompts are available in these menus with firmware revisions 6 .0 and
above .
R: Read
W: Write
E: EEPROM
S: User Set