Watlow EZ-ZONE RMC - Manual (Page 149)

Watlow EZ-ZONE ® RMC Module • 146 • Chapter 6 Factory Page
RMC Module • Factory Page
Display
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Parameter
ID
Data
Type
& Read/
Write
[LoC;o]
[LoC.o] Security Setting
Operations Page
Use to change the
required security level
clearance required to
gain access to the Op-
erations Page.
1 to 3 2 43342 0x67 (103)
1
2
- - - - 3002 unit
RWE
[LoC;P]
[LoC.P] Security Setting
Profiling Page
Use to change the
required security level
clearance required to
gain access to the Pro-
filing Page.
1 to 3 3 43354 0x67 (103)
1
8
- - - - 3008 uint
RWE
[pas;e]
[LoC.P] Security Setting
Password Enable
Turn Password En-
able ON if a Password
access feature is
desired. This is in ad-
dition to Read Lock or
Write Security..
[`off] Off
[``on] On
Off - - - - - - - - - - - - - - - - - - - -
[rLoC]
[rLoC] Security Setting
Read Lock
Set the read security
clearance level. The
user can access the
selected level and all
lower levels.
Applies regardless of
Password Enable set-
ting. Set the Read
Lock clearance level.
The user can have
read access to the
selected level and all
lower levels. If the
Write Security level is
higher than the Read
Lock, the Read Lock
level takes priority.
1 to 5 5 - - - - 0x67 (103)
1
0x0A (10)
- - - - 3010 uint
RWE
Note:
Some values will be rounded off to fit in the four-character display . Full values can be read
with another interface .
If there is only one instance of a menu, no submenus will appear .
R: Read
W: Write
E: EE-
PROM
S: User
Set