Philips V200 - Manual (Page 56)

Chapter 5
5-6 Respironics V200 Ventilator Operator’s Manual REF 1057983 A
Setup
Entering Diagnostic Mode
1. To access the Diagnostic Mode, simultaneously press the ALARM
RESET and 100% O
2
keys on the front panel for approximately five
seconds while turning the ventilator power on. The following message
will appear on the screen:
Figure 5-4: Warning in Diagnostic Mode
2. Press the OK button to enter the Diagnostic Mode. The following
screen appears:
Figure 5-5: Main Screen in Diagnostic Mode