Patient circuit flex arm installation, Patient circuit flex arm installation instructions, Patient circuit flex arm installation -22 – Philips V200 User Manual

Page 50

Text mode
Original mode

Chapter 4

4-22

Respironics V200 Ventilator Operator’s Manual

REF 1057983 A

Getting Started

Patient Circuit Flex
Arm Installation

A patient circuit flex arm is provided for use on the ventilator. The patient
circuit flex arm may be installed on either the left or right side rail on the cart.

Figure 4-22: Patient Circuit Flex Arm Installation

Patient Circuit Flex Arm Installation Instructions

Refer to Figure 4-22.

1. Slide flex arm bracket (1) on to the

side rail of the cart (one per side).

2. Tighten black screw knob (2) on flex arm bracket.

3. Insert base of flex arm (3) into flex arm bracket and tighten.

4. Place patient circuit hose clamp (4) into the flex arm clamp (5) and

tighten.