Philips V200 - Manual (Page 247)

Options and Accessories
REF 1057983 A Respironics V200 Ventilator Operator’s Manual 13-83
Chapter 13
Flow-Trak
®
Option
Flow-Trak provides additional flow to Volume Control Ventilation (VCV) breaths.
It allows the patient to draw additional flow or volume as desired.
Ventilators with Flow-Trak installed are identified by the option label as seen in
Figure 13-39.
Figure 13-39: Flow-Trak option label
Once the Flow-Trak option has been loaded on the ventilator it is active. Follow
these steps to turn Flow-Trak Off and On:
1. While in VCV, press the Peak Flow settings button.
2. Press the Ftrak OFF button.
3. Press the Accept button.
Use these same steps pressing Ftrak On to turn Flow-Trak on.
Figure 13-40: Turning off the Flow-Trak Option
Flow-Trak will stay resident on the ventilator when shut down and restarted.
That is, if Flow-Trak is OFF when the ventilator is shut down then it will be OFF
the next time the ventilator is started.