Philips V200 - Manual (Page 133)

REF 1057983 A Respironics V200 Ventilator Operator’s Manual 11-1
Chapter 11. Diagnostics
The Diagnostic Mode allows you to:
• Run short self test (SST)
• Run extended self test (EST)
• Run hardware diagnostics to help you troubleshoot SST or EST failures
• Check the software revision of the ventilator
• Set user configuration, including:
•
time and date
• compliance compensation enable/disable
• local altitude and time format
• backup battery (confirm at startup) enable/disable
• Check diagnostic codes.
WARNING: The patient must be disconnected from the ventilator before entering the
Diagnostic Mode since normal ventilation is suspended.
CAUTION: Troubleshooting and repair should be performed only by a qualified
service technician.
NOTE: The “Hardware” function and EST in the Diagnostics Mode should only
be run by qualified personnel.