Philips V200 - Manual (Page 192)

Chapter 13
13-28 Respironics V200 Ventilator Operator’s Manual REF 1057983 A
Options and Accessories
Figure 13-24: Connecting the Ventilator to a Printer
Printing a Screen
To print a screen, touch the printer icon in the lower right corner of the screen.
While the ventilator processes the print screen request, the screen freezes
(typical freeze time of 30-60 seconds, depending on ventilator settings) and
the printer icon turns gray. Ventilation and monitoring continue uninterrupted
although the screen does not update during this time.
Certain screens and popup menus cover the printer icon and are not available
for printing. The print screen function is also not available any other time the
printer icon is gray.
Canceling a Print Screen Request
To cancel a print screen request (e.g. during an alarm), touch the frozen screen
at any location. Any contact with the touch screen (including the gray printer
icon) while the printer icon is gray cancels the print in progress.
Print Screen Messages
Table 13-2 summarizes print screen messages that can occur. The actual
message displayed depends on the connected printer. For example, if a printer
turns itself offline when it is out of paper, the error message may indicate that
the printer is offline rather than out of paper.
Parallel Printer Port
Ventilator (Back Panel)
Parallel Printer Cable