Philips V200 - Manual (Page 236)

Chapter 13
13-72 Respironics V200 Ventilator Operator’s Manual REF 1057983 A
Options and Accessories
Selecting Parameters
for Display
On the Trending screen (Figure 13-35), a Parameter select button above each
waveform shows the name of the currently displayed parameter. To choose a
different parameter for display, press the button above the waveform: a
Trended Data pop-up window allows you to select another parameter.
Figure 13-35: Selecting Parameters for Display on the Trending Screen
Four category select buttons (PT Data, Settings, Mech, NICO) appear at the
top of the Trended Data pop-up window. Each button, when pressed, displays a
different set of Parameter select buttons. There are a total of 78 parameters
that are displayed by the four category select buttons. Below is a summary of
each category select button.
Time scale button Displays the time scale menu to select from 2 to 72 hours. The
button shows the currently selected time scale.
View 1 and View 2 buttons Displays either of two user-defined views. Each view consists of
three trending waveforms and a time scale. The button shows the
active view.
Clear button Clears all stored trended data.
Table 13-10: Summary of Trending Screen Information
Category
select
buttons
Parameter
select
buttons
Trended Data pop-up window
Parameter select button