Siemens S223 - Manual (Page 87)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 87
6.1.8 Login Banner
It is possible to set system login and log-out banner. Administrator can leave a message
to other users with this banner.
To set system login and log-out banner, use the following command.
Command Mode Description
banner Sets a banner before login the system.
banner login Sets a banner when successfully log in the system.
banner login-fail
Global
Sets a banner when failing to login the system.
To restore a default banner, use the following command.
Command Mode Description
no banner
no banner login
no banner login-fail
Global Restores a default banner.
To display a current login banner, use the following command.
Command Mode Description
show banner
Enable
Global
Shows a current login banner.
6.1.9 DNS Server
To set a DNS server, use the following command.
Command Mode Description
dns server A.B.C.D Sets a DNS server.
no dns server A.B.C.D
Global
Removes a DNS server.
show dns
Enable
Global
Shows a DNS server.
If a specific domain name is registered instead of IP address, user can do telnet, FTP,
TFTP and ping command to the hosts on the domain with domain name.
To configure DNS domain name, use the following command.
Command Mode Description
dns search DOMAIN Searches a domain name.
no dns search DOMAIN
Global
Removes a domain name.
It is possible to delete DNS server and domain name at the same time with the below
command.