Siemens Simatic S7-400 User Manual
Leere, Simatic
General Technical Specifications
PROFIBUS DP Master Interface
IM 467/IM 467 FO
Cable Duct and Fan
Subassemblies
Appendices
LEERE
Parameter Sets for
Signal Modules
Diagnostic Data of the
Signal Modules
Guidelines for Handling Electro-
static Sensitive Devices (ESD)
S7-400, M7-400 Programmable
Controllers
Module Specifications
Reference Manual
SIMATIC
This manual is part of the documentation
package with the order number:
6ES7498-8AA03-8BA0
Edition 09/2003
A5E00069467-07
This manual is related to the following products:
Table of contents
Document Outline
- Title
- Preface
- Contents
- 1 General Technical Specifications
- 1.1 Standards and Approvals
- 1.2 Electromagnetic Compatibility
- 1.3 Shipping and Storage Conditions for Modules and Backup Batteries
- 1.4 Mechanical and Ambient Climatic Conditions for Operating the S7-400/M7-400
- 1.5 Information on Insulation Tests, Protection Class and Degree of Protection
- 1.6 Using S7-400 in a zone 2 explosion–risk area
- 2 Racks
- 3 Power Supply Modules
- 3.1 Common Characteristics of the Power Supply Modules
- 3.2 Redundant Power Supply Modules
- 3.3 Backup Battery (Option)
- 3.4 Controls and Indicators
- 3.5 Fault/Error Messages via LEDs
- 3.6 Power Supply Module PS 407 4A; (6ES7407-0DA00-0AA0)
- 3.7 Power Supply Module PS 407 4A; (6ES7407-0DA01-0AA0)
- 3.8 Power Supply Modules PS 407 10A; (6ES7407-0KA01-0AA0) and PS 407 10A R; (6ES7407-0KR00-0AA0)
- 3.9 Power Supply Module PS 407 20A; (6ES7407-0RA00-0AA0)
- 3.10 Power Supply Module PS 407 20A; (6ES7407-0RA00-0AA0)
- 3.11 Power Supply Module PS 405 4A; (6ES7405-0DA00-0AA0)
- 3.12 Power Supply Module PS 405 4A; (6ES7405-0DA01-0AA0)
- 3.13 Power Supply Module PS 405 10A; (6ES7405-0KA00-0AA0)
- 3.14 Power Supply Modules PS 405 10A; (6ES7405-0KA01-0AA0) and PS 405 10A R; (405-0KR00-0AA0)
- 3.15 Power Supply Module PS 405 20A; (6ES7405-0RA00-0AA0)
- 3.16 Power Supply Module PS 405 20A; (6ES7405-0RA01-0AA0)
- 4 Digital Modules
- 4.1 Module Overview
- 4.2 Sequence of Steps from Choosing to Commissioning
- 4.3 Digital Module Parameter Assignment
- 4.4 Diagnostics of the Digital Modules
- 4.5 Interrupts of the Digital Modules
- 4.6 Input Characteristic Curve for Digital Inputs
- 4.7 Digital Input Module SM 421; DI 32 x 24 VDC (6ES7421-1BL00-0AA0)
- 4.8 Digital Input Module SM 421; DI 32 x 24 VDC; (6ES7421-1BL01-0AA0)
- 4.9 Digital Input Module SM 421; DI 16 x 24 VDC; (6ES7421-7BH00-0AB0)
- 4.10 Digital Input Module SM 421; DI 16 x 24 VDC; (6ES7421-7BH01-0AB0)
- 4.11 Digital Input Module SM 421; DI 16 x 120 VAC; (6ES7421-5EH00-0AA0)
- 4.12 Digital Input Module SM 421; DI 16 x 24/60 VUC; (6ES7 421-7DH00-0AB0)
- 4.13 Digital Input Module SM 421; DI 16 x 120/230 VUC; (6ES7 421-1FH00-0AA0)
- 4.14 Digital Input Module SM 421; DI 16 x 120/230 VUC; (6ES7421-1FH20-0AA0)
- 4.15 Digital Input Module SM 421; DI 32 x 120 VUC; (6ES7421-1EL00-0AA0)
- 4.16 Digital Output Module SM 422; DO 16 x 24 VDC/2 A; ( 6ES7422- 1BH10- 0AA0)
- 4.17 Digital Output Module SM 422; DO 16 x 24 VDC/2 A; ( 6ES7422- 1BH11- 0AA0)
- 4.18 Digital Output Module SM 422; DO 16 x 20-125 VDC/1.5 A; (6ES7422-5EH10-0AB0)
- 4.19 Digital Output Module SM 422; DO 32 x 24 VDC/0.5 A; (6ES7422-1BL00-0AA0)
- 4.20 Digital Output Module SM 422; DO 32 x 24 VDC/0.5 A; (6ES7422-7BL00-0AB0)
- 4.21 Digital Output Module SM 422; DO 8 x 120/230 VAC/5 A; (6ES7422-1FF00-0AA0)
- 4.22 Digital Output Module SM 422; DO 16 x 120/ 230 VAC/ 2 A; (6ES7422-1FH00-0AA0)
- 4.23 Digital Output Module SM 422; DO 16 x 20-120 VAC/2 A; (6ES7422-5EH00-0AB0)
- 4.24 Relay Output Module SM 422; DO 16 x 30/ 230 VUC/ Rel. 5 A; (6ES7422-1HH00-0AA0)
- 5 Analog Modules
- 5.1 Module Overview
- 5.2 Sequence of Steps from Choosing to Commissioning the Analog Modules
- 5.3 Analog Value Representation
- 5.4 Setting the Measuring Method and Measuring Ranges of the Analog Input Channels
- 5.5 Behavior of the Analog Modules
- 5.6 Conversion, Cycle, Setting and Response Time of Analog Modules
- 5.7 Analog Module Parameter Assignment
- 5.8 Connecting Sensors to Analog Inputs
- 5.9 Connecting Voltage Sensors
- 5.10 Connecting Current Sensors
- 5.11 Connecting Resistance Thermometers and Resistors
- 5.12 Connecting Thermocouples
- 5.13 Connecting Loads/Actuators to Analog Outputs
- 5.14 Connecting Loads/Actuators to Voltage Outputs
- 5.15 Connecting Loads/Actuators to Current Outputs
- 5.16 Diagnostics of the Analog Modules
- 5.17 Analog Module Interrupts
- 5.18 Analog Input Module SM 431; AI 8 x 13 Bit; (6ES7431-1KF00-0AB0)
- 5.19 Analog Input Module SM 431; AI 8 x 14 Bit; (6ES7 431-1KF10-0AB0)
- 5.20 Analog Input Module SM 431; AI 8 x 14 Bit; (6ES7431-1KF20-0AB0)
- 5.21 Analog Input Module SM 431; AI 16 x 13 Bit;
- 5.22 Analog Input Module SM 431; AI 16 x 16 Bit; (6ES7431-7QH00-0AB0)
- 5.23 Analog Input Module SM 431; AI 8 x RTD x 16 Bit; (6ES7 431-7KF10-0AB0)
- 5.24 Analog Input Module SM 431; AI 8 x 16 Bit; (6ES7431-7KF00-0AB0)
- 5.25 Analog Output Module SM 432; AO 8 x 13 Bit; (6ES7432-1HF00-0AB0)
- 6 Interface Modules
- 6.1 Common Features of the Interface Modules
- 6.2 The Interface Modules IM 460-0; (6ES7460-0AA00-0AB0, 6ES7460-0AA01-0AB0) and IM 461-0; (6ES7461-0AA00-0AA0, 6ES7461-0AA01-0AA0)
- 6.3 The Interface Modules IM 460-1; (6ES7460-1BA00-0AB0, 6ES7460-1BA01-0AB0) and IM 461-1; (6ES7461-1BA00-0AA0, 6ES7461-1BA01-0AA0)
- 6.4 The Interface Modules IM 460-3; ( 6ES7460- 3AA00- 0AB0, 6ES7460-3AA01-0AB0) and IM 461-3; (6ES7461-3AA00-0AA0, 6ES7461-3AA01-0AA0)
- 6.5 The Interface Modules IM 460-4; ( 6ES7460- 4AA01- 0AB0) and IM 461-4; (6ES7461-4AA01-0AA0)
- 7 IM 463-2
- 7.1 Using SIMATIC S5 Expansion Units in an S7-400
- 7.2 Rules for Connecting S5 Expansion Units
- 7.3 Operator Controls and Indicators
- 7.4 Installing and Connecting the IM 463-2
- 7.5 Setting the Operating Modes of the IM 314
- 7.6 Configuring S5 Modules for Operation in the S7-400
- 7.7 Pin Assignments of the 721 Connecting Cable
- 7.8 Terminating Connector for IM 314
- 7.9 Technical Specifications (6ES7463–2AA00–0AA0)
- 8 PROFIBUS DP Master Interface IM 467/ IM 467 FO
- 9 Cable Duct and Fan Subassemblies
- 10 RS 485 Repeater
- 11 CPUs for M7-400
- 11.1 Performance Features
- 11.2 Technical Specifications
- 11.3 Function Elements
- 11.4 The BIOS Setup
- 11.4.1 BIOS Power Up
- 11.4.2 BIOS Hot Keys
- 11.4.3 Operator Inputs in the BIOS Setup
- 11.4.4 Opening and Exiting the BIOS Setup
- 11.4.5 Setup Page “User Help”
- 11.4.6 Setup Page “IF modules”
- 11.4.7 Setup Page “Timeout Function”
- 11.4.8 Setup Page “Security”
- 11.4.9 Setup Page “Date and Time”
- 11.4.10 “Hard Disk” Setup Page
- 11.4.11 Setup Page “Floppy/Card”
- 11.4.12 Setup Page “Boot Options”
- 11.4.13 Setup Page “System”
- 11.5 I/O Addresses, Main Memory and Interrupt Assignments
- 12 M7-400 Expansions
- 13 Interface Submodules
- 13.1 Interface Submodules Overview
- 13.2 Submodule IDs and Insertion Rules
- 13.3 IF 962-VGA Interface Submodule for M7-300/400; (6ES7962-1BA00-0AC0)
- 13.4 IF 962-COM Interface Submodule for M7-300/400; (6ES7962-3AA00-0AC0)
- 13.5 IF 962-LPT Interface Submodule for M7-300/400; (6ES7962-4AA00-0AC0)
- 13.6 IF 961-DIO Interface Submodule for M7-300/400; (6ES7961-1AA00-0AC0)
- 13.7 IF 961-AIO Interface Submodule for M7-300/400; (6ES7961-2AA00-0AC0)
- 13.7.1 Pin Assignments and Terminal Connection Diagram
- 13.7.2 Connecting Measured Value Sensors to Analog Inputs
- 13.7.3 Connecting Loads/Actuators to Analog Outputs
- 13.7.4 Conversion Time and Cycle Time of the Analog Input Channels
- 13.7.5 Conversion Time, Cycle Time, Settling Time, and Response Time of the Analog Output Channels
- 13.7.6 Starting Up the IF 961-AIO Interface Submodule
- 13.7.7 Addressing
- 13.7.8 Analog Output Function
- 13.7.9 Analog Input Function
- 13.7.10 Analog Value Representation for the Measuring Ranges of the Analog Inputs
- 13.7.11 Analog Value Representation for the Measuring Ranges of the Analog Outputs
- 13.7.12 Diagnostics, Interrupts, and Submodule ID
- 13.7.13 Technical Specifications
- 13.8 IF 961-CT1 Interface Submodule for M7-300/400; (6ES7961-3AA00-0AC0)
- 13.9 IF 964-DP Interface Submodule for S7-400 and M7-400
- A Parameter Sets for Signal Modules
- B Diagnostic Data of the Signal Modules
- B.1 Evaluating the Diagnostic Data of the Signal Modules in the User Program
- B.2 Structure and Contents of Diagnostic Data Bytes 0 and 1
- B.3 Diagnostic Data of the Digital Input Modules as of Byte 2
- B.4 Diagnostic Data of the Digital Output Modules as of Byte 2
- B.5 Diagnostic Data of the Analog Input Modules as of Byte 2
- C Spare Parts ans Accessories
- D Guidelines for Handling Electrostatic Sensitive Devices ( ESD)
- E List of Abbreviations
- Glossary
- Index