Siemens S223 - Manual (Page 43)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 43
To delete the created account, use the following command.
Command Mode Description
user del NAME Global Delete the created account.
To display the created account, use the following command.
Command Mode Description
show user Enable/Global Shows the created account.
4.1.4.2 Configuring Security Level
For the hiD 6615 S223/S323, it is possible to configure the security level from 0 to 15 for
a system account. The level 15, as the highest level, has a read-write authority. The ad-
ministrator can configure from level 0 to level 14. The administrator decides which level
user uses which commands in which level. As the basic right from level 0 to level 14, it is
possible to use exit and help command in Privileged EXEC Enable mode and it is not
possible to access to Privileged EXEC Enable mode.
To define the security level and its authority, use the following command.
Command Mode Description
privilege bgp level <0-15>
{COMMAND | all}
Uses the specific command of BGP Configuration mode
in the level.
privilege bridge level <0-15>
{COMMAND | all}
Uses the specific command of Bridge Configuration
mode in the level.
privilege configure level <0-15>
{COMMAND | all}
Uses the specific command of Global Configuration
mode in the level.
privilege dhcp-option82 level
<0-15> {COMMAND | all}
Uses the specific command of DHCP Option 82 Con-
figuration mode in the level.
privilege dhcp-pool level <0-15>
{COMMAND | all}
Uses the specific command of DHCP Configuration
mode in the level.
privilege dhcp-class level
<0-15> {COMMAND | all}
Uses the specific command of DHCP Option 82 Con-
figuration mode in the level.
privilege dhcp-pool-class level
<0-15> {COMMAND | all}
Uses the specific command of DHCP Configuration
mode in the level.
privilege enable level <0-15>
{COMMAND | all}
Uses the specific command of Privileged EXEC mode
in the level.
privilege interface level <0-15>
{COMMAND | all}
Uses the specific command of Interface Configuration
mode in the level.
privilege ospf level <0-15>
{COMMAND | all}
Uses the specific command of OSPF Configuration
mode in the level.
privilege pim level <0-15>
{COMMAND | all}
privilege rip level <0-15>
{COMMAND | all}
Global
Uses the specific command of PIM Configuration mode
in the level.
Uses the specific command of RIP Configuration mode
in the level.