Siemens S223 - Manual (Page 319)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 319
Step 2
To specify a network to operate with BGP, use the following command.
Command Mode Description
network A.B.C.D/M
network A.B.C.D mask NET-
MASK
Router
Adds BGP network to operate.
A.B.C.D/M: network address with netmask
A.B.C.D: network address
NETMASK: subnet mask
10.1.1.3 Disabling BGP Routing
Step 1
To delete a specified network to operate with BGP, use the following command.
Command Mode Description
no network A.B.C.D/M
no network A.B.C.D mask NET-
MASK
Router
Deletes BGP network.
A.B.C.D/M: network address with netmask
A.B.C.D: network address
NETMASK: subnet Mask
Step 2
Go back to Global Configuration mode using the exit command.
Step 3
To disable BGP routing of the chosen AS, use the following command.
Command Mode Description
no router bgp <1-65535> Global
Deletes assigned AS number to configure BGP routing,
enter the AS number.
1-65535: AS number
10.1.2 Advanced Configuration
The hiD 6615 S323 is possibly configured for the additional configurations related BGP.
The advanced configurations describe in the following sections, are as follows:
• Summary of Path
• Automatic Summarization of Path
• Multi-Exit Discriminator (MED)
• Choosing Best Path
• Graceful Restart