Siemens S223 - Manual (Page 302)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
302 A50010-Y3-C150-2-7619
9.2.8.4 Applying IGMP Profile to the Filter Port
To apply the configured IGMP Profile to the filter port, use the following command.
Command Mode Description
ip igmp filter port PORTS profile
<1-2147483647>
Global
Configures IGMP profile.
PORTS: port number
1-2147483647: number of configured IGMP profile
To cancel the applying of the profile, use the following command.
Command Mode Description
no ip igmp filter port PORTS Global
Disables an applied IGMP profile.
PORTS: port number
To display the IGMP filter configuration, use the following command.
Command Mode Description
show ip igmp filter [port PORTS]
Enable
Global
Bridge Shows a configuration.
9.2.8.5 Max Number of IGMP Join Group
You can configure the maximum number of IGMP groups that a Layer 2 interface can join.
To configure the maximum number of IGMP groups per port, use the following command.
Command Mode Description
ip igmp max-groups port PORTS
count <0-2147483647>
Global
Configures the maximum number of IGMP groups.
PORTS: port number
0-2147483647: maximum number of IGMP groups that
the port can join
To return to the default setting, use the following command.
Command Mode Description
no ip igmp max-groups port
PORTS count
Global
Returns to the default of no maximum.
PORTS: the number of port