Siemens S223 - Manual (Page 74)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
74 A50010-Y3-C150-2-7619
Command Mode Description
port medium PORT {sfp | rj45} Bridge
Selects port type
(Default: RJ45)
To view the configuration of switch port type, use the following command.
Command Mode Description
show port medium
Enable
Global
Bridge Shows port type
5.2 Ethernet Port Configuration
5.2.1 Enabling Ethernet Port
To enable/disable a port, use the following command.
Command Mode Description
port {enable | disable} PORTS Bridge
Enables/disables a port, enter a port number.
(Default: enable)
The following is an example of disabling the Ethernet port 1 to 3.
SWITCH(config)# bridge
SWITCH(bridge)# show port 1-5
-------------------------------------------------------------------
NO TYPE PVID STATUS MODE FLOWCTRL INSTALLED
(ADMIN/OPER)
-------------------------------------------------------------------
1: Ethernet 1 Up/Down Auto/Half/0 Off N
2: Ethernet 1 Up/Down Auto/Half/0 Off N
3: Ethernet 1 Up/Down Auto/Half/0 Off N
4: Ethernet 1 Up/Down Auto/Half/0 Off N
5: Ethernet 1 Up/Down Auto/Half/0 Off N
SWITCH(bridge)# port disable 1-3
SWITCH(bridge)# show port 1-5
-------------------------------------------------------------------
NO TYPE PVID STATUS MODE FLOWCTRL INSTALLED
(ADMIN/OPER)
-------------------------------------------------------------------
1: Ethernet 1 Down/Down Auto/Half/0 Off N
2: Ethernet 1 Down/Down Auto/Half/0 Off N
3: Ethernet 1 Down/Down Auto/Half/0 Off N
4: Ethernet 1 Up/Down Auto/Half/0 Off N
5: Ethernet 1 Up/Down Auto/Half/0 Off N
SWITCH(bridge)#