Siemens S223 - Manual (Page 270)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
270 A50010-Y3-C150-2-7619
To return ERP Test Packet Interval as Default, use the following command.
Command Mode Description
no erp test-packet-interval DO-
MAIN-ID
Bridge Configures ERP test packet interval as default value
8.9.3.10 Displaying ERP Configuration
To display a configuration for ERP, use the following command.
Command Mode Description
show erp {all | DOMAIN-ID}
Enable
Global
Bridge Shows the information of ERP
8.10 Stacking
It is possible to manage several switches with one IP address by using stacking. If there’s
a limitation for using IP addresses and there are too many switches which you must man-
age, you can manage a number of switches with a IP address using this stacking function.
Switch stacking technology available in the industry today provides two main benefits to
customers. The first benefit is the ability to manage a group of switches using a single IP
address. The second benefit is the ability to interconnect two or more switches to create a
distributed fabric, which behaves in the network as a unified system. The hiD 6615
S223/S323 provides the stacking technology’s benefits for the customer.
It is possible to configure stacking function for switches from 2 to 16.
The following is an example of the network where stacking is configured.
Internet
Switch
Switch A
Master Switch
Switch B
Slave Switch
Switch C
Slave Switch
Switch Switch
Fig. 8.39 Example of Stacking
i