Siemens S223 - Manual (Page 100)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
100 A50010-Y3-C150-2-7619
6.3.6 Configuring Ageing time
SURPASS hiD 6615 records MAC Table to prevent Broadcast packets from transmitting.
And unnecessary MAC address that does not response during specified time is deleted
from the MAC table automatically. The specified time is called Ageing time.
To specify the Ageing time, use the following command.
Command Mode Description
mac aging-time <10-
21474830>
Bridge
Specifies the Ageing time.
Default: 300sec
6.3.7 Running Time of System
To display running time of the system, use the following command.
Command Mode Description
show uptime
Enable
Global
Shows running time of the system.
The following is an example of displaying running time of the system.
SWITCH# show uptime
10:41am up 15 days, 10:55, 0 users, load average: 0.05, 0.07, 0.01
SWITCH#
6.3.8 System Information
To display the system information, use the following command.
Command Mode Description
show system
Enable
Global
Shows the system information.
The following is an example of displaying the system information of hiD 6615 S223/S323.
SWITCH(config)# show system
SysInfo(System Information)
Model Name : SURPASS hiD6615 S323
Main Memory Size : 128 MB
Flash Memory Size : 8 MB(INTEL 28F640J3), 32 MB(INTEL 28F256J3)
S/W Compatibility : 3, 7
H/W Revision : DS-T3-07F-A2
NOS Version : 3.06
B/L Version : 4.69
H/W Address : 00:d0:cb:27:01:66
PLD Version : 0x10
Serial Number : N/A
SWITCH(config)#