Siemens S223 - Manual (Page 138)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
138 A50010-Y3-C150-2-7619
7.5.4 Debug Message for Remote Terminal
To display a syslog debug message to a remote terminal, use the following command.
Command Mode Description
terminal monitor Enables a terminal monitor function.
no terminal monitor
Enable
Disables a terminal monitor function.
Terminal monitor is not possible to be operational in local console.
7.5.5 Disabling Syslog
To disable the syslog manually, use the following command.
Command Mode Description
no syslog Global Disables the syslog.
7.5.6 Displaying Syslog Message
To display a received syslog message in the system memory, use the following command.
Command Mode Description
show syslog local {volatile |
non-volatile } [NUMBER]
Shows a received syslog message.
volatile: removes a syslog message after restart.
non-volatile: reserves a syslog message.
NUMBER: shows the last N syslog messages.
show syslog local {volatile |
non-volatile } reverse
Enable
Global
Shows the syslog messages from the latest one.
clear syslog local {volatile | non-
volatile }
Enable
Global
Removes a received syslog message.
7.5.7 Displaying Syslog Configuration
To display a configuration of the syslog, use the following command.
Command Mode Description
show syslog
show syslog {volatile | non-
volatile } information
Enable
Global
Shows a configuration of the syslog.
i