Siemens S223 - Manual (Page 360)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
360 A50010-Y3-C150-2-7619
10.2.18.4 Maximum Process of LSA
The hiD 6615 S323 can configures maximum number of LSA to process. LSA is classified
as internal route LSA and external route LSA, maximum number of LSA can configure on
each class.
And also, If process of LSA is over the configured number, you can configure it to stop the
process or send the caution message. When the outer route of LSA is overflowed the as-
signed value, you can configure it to restart OSPF after the waiting time. If the waiting
time is 0, OSPF keep the process before the administrator reboots the system.
To assign the maximum number of LSA to process in OSPF, use the following command.
Command Mode Description
overflow database
<1-4294967294> [hard | soft]
Assigns the number of LSA for internal route.
overflow database external
<0-2147483647> <0-65535>
Router
Assigns the number of LSA for external route.
When there is an overflow, hard configuration will stop the process, and soft configura-
tion will send a caution message.
To release the configuration, use the following command.
Command Mode Description
no overflow database Releases the configuration for OSPF internal route.
no overflow database external
[<0-2147483647>]
no overflow database external
<0-2147483647> [<0-65535>]
Router
Releases the configuration for OSPF external route.