Siemens S223 - Manual (Page 326)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
326 A50010-Y3-C150-2-7619
To create a BGP Peer Group, use the following command.
Command Mode Description
neighbor NAME peer-group
Create a BGP peer group.
NAME: peer group name
no neighbor NAME peer-group
Router
Delete the BGP peer group created before.
To specify neighbor to the created peer group, use the following command.
Command Mode Description
neighbor NEIGHBOR-IP peer-
group NAME
Includes BGP neighbor to specified peer group using
IP address.
NEIGHBOR-IP: neighbor IP address
NAME: peer group name
no neighbor NEIGHBOR-IP peer-
group NAME
Router
Removes BGP neighbor from the specified Peer
Group.
10.1.4.3 Route Map
You can apply the specific route map on neighboring router that the exchange route in-
formation between routers or blocking the IP address range is configured on route map.
To make BGP Neighbor router exchange the routing information using Route-map, use
the following command.
Command Mode Description
neighbor {NEIGHBOR-IP |
GROUP } route-map NAME {in |
out }
Applies a route map to incoming or outgoing routes on
neighboring router or peer group and exchange the
route information.
NEIGHBOR-IP: neighbor IP address
GROUP: peer group name
NAME: route map name
no neighbor {NEIGHBOR-IP |
GROUP } route-map NAME {in |
out }
Router
Removes the connection with configured route-map.
10.1.4.4 Force Shutdown
The hiD 6615 S323 supports the feature to force to shutdown any active session for the
specified BGP router or peer group and to delete the routing data between them. It shut-
downs all connections and deletes the received path information from neighboring router
or peer group.