Siemens S223 - Manual (Page 247)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 247
8.8.2 DHCP Address Allocation with Option 82
The DHCP server provided by the hiD 6615 S223/S323 can assign dynamic IP addresses
based on DHCP option 82 information sent by the DHCP relay agent.
The information sent via DHCP option 82 will be used to identify which port the
DHCP_REQUEST came in on. The feature introduces a new DHCP class capability,
which is a method to group DHCP clients based on some shared characteristics other
than the subnet in which the clients reside. The DHCP class can be configured with op-
tion 82 information and a range of IP addresses.
8.8.2.1 DHCP Class Capability
To enable the DHCP server to use a DHCP class to assign IP addresses, use the follow-
ing command.
Command Mode Description
ip dhcp use class
Enables the DHCP server to use a DHCP class to
assign IP addresses.
no ip dhcp use class
Global
Disables the DHCP server to use a DHCP class.
8.8.2.2 DHCP Class Creation
To create a DHCP class, use the following command.
Command Mode Description
ip dhcp class CLASS
Creates a DHCP class and opens DHCP Class Con-
figuration mode.
CLASS: DHCP class name
no ip dhcp class [CLASS]
Global
Deletes a created DHCP class.
8.8.2.3 Relay Agent Information Pattern
To specify option 82 information for IP assignment, use the following command.
Command Mode Description
relay-information remote-id ip A.B.C.D [circuit-
id {hex HEXSTRING | index <0-65535> | text
STRING }]
relay-information remote-id hex HEXSTRING
[circuit-id {hex HEXSTRING | index <0-65535> |
text STRING}]
relay-information remote-id text STRING [cir-
cuit-id {hex HEXSTRING | index <0-65535> |
text STRING}]
DHCP
Class
Specifies option 82 information for IP
assignment.